![]() |
![]() |
![]()   The mission of T.I.Tech CanSat#004 is to transmit CCD image to the ground station, and the object of CanSat#004 is to get image certainly using high power anmlifier(2W).   A power of CanSat is on when it is released form carrier, so our goal is to get continuous image form immediately after CanSat is released to just before CanSat lands on the ground. ![]() T.I.Tech CanSat#004 was launched at 29 July(2nd day of ARLISS), we could get continuous image of CanSat falling for 20 minuts!!!!!   Our goal is almost achieved. As for image taken immediately after Cansat releace, we could get iamge of other university CanSat ond the norsecorn of rocket and so on, on the other hand, as for image taken just before CanSat landing, influence of some cars ond tents, the state of receiving became worse. So we couldn't get image just before landing, but we can confirm the ground in image.   The following shows some still picture extract from CCD image we get.   As file size of 20 minutes image is very large, we converted CCD image into mpeg file and divided it 10 files every 2 minutes. If you would like to see, download each files. 10⇔12minute   12⇔14minute   14⇔16minute   16⇔18minute   18⇔20minute   If you want high quality(720×480pixel) and continuous movie, download hear. |
|
![]() |
Copyright(C)
1999,2000,2001 -CANSAT 4 SabSat2- All rights reserved. Tokyo Institute of Technology    Space Robotics and Teleoperations Laboratory (SRTL) ARLISS 2000 CANSAT TEAM Contact : Hirotaka SAWADA |