| Japanese Version | | English Version | Mission Overview   The mission of T.I.Tech CanSat#005 is transmitting a stii picture taken by CCD camerato the ground station. A CCD camera image is converted into SSTV(Slow Scan Television) form and transmited using transceiver(144MHz band range). It is possible to get optional time image receiving the command fron ground station, and it takes about 90sec to transmite one image.   TR-8II, TASCO Electronics corporation,ltd produts, is adapted as scan converter, and TCR-8II, TASCO products too, is adapted as the software for receivig SSTV image. Experimental Results   T.I.Tech CanSat#005 was launched at 29 July(the 2nd day of ARLISS), and we could get 28 images!! The following are some images we get. After the CanSat was inserted into the carrier After the nose corn was integrated After the CanSat was released While CanSat was falling #01 While CanSat was falling #02 While CanSat was falling #03 While CanSat was falling #04 While CanSat was falling #05 While CanSat was falling #06 While CanSat was falling #07 While CanSat was falling #08 While CanSat was falling #09 While CanSat was falling #10 While CanSat was falling #11 While CanSat was falling #12 While CanSat was falling #13 Inside of car image after we found the CanSat The CanSat came back to the ground station   Because a quality of CCD camera is not better, some images while CanSat was falling are not clear , however in some images ,the number from #07 to #013(While CanSat was falling), we can conferm a wheeel track(maybe) is rotating and approaching. | Japanese Version | | English Version |

[Overview] [Subsystem] [Schedule] [Member] [Photo] [Results]

Copyright(C) 1999,2000,2001 -CANSAT 5 SSTV-Sat- All rights reserved. Tokyo Institute of Technology    Space Robotics and Teleoperations Laboratory (SRTL) ARLISS 2000 CANSAT TEAM Contact : Hirotaka SAWADA