Top 
How To Recieve FM Telemetry Format Comm. HouseKeeping
| Comm. HK Frame | |
|---|---|
| 0 | 0xB0 |
| 1 | System Time |
| 2 | |
| 3 | |
| 4 | |
| 5 | FET Status |
| 6 | Sat Status |
| 7 | RX Reset Count |
| 8 | |
| 9 | TX Reset Count |
| 10 | |
| 11 | EPS 3.3V |
| 12 | EPS 5.0V |
| 13 | EPS Battery Voltage |
| 14 | EPS Main Bus |
| 14 | Temperature Comm. Board (Comm.) |
| 15 | Temperature Battery |
| 16 | EPS Battery Current |
| 17 | S 144MHz |
| 18 | S 1200MHz |
| 19 | EPS Battery Voltage Ave. |
| 20 | APD FRAM Address |
| 21 | |
| Total | 23bytes |
System time of the comm. controller wchich indicates time from comm. activation. 4 Bytes(0～4294967295sec)．
FET Status describes power status of internal devices of Cute-1.7 + APD II.
| 7 | APD3.3A |
| 6 | APD3.3B |
| 5 | APD Main |
| 4 | DAQ |
| 3 | PDA |
| 2 | TH-59(1200MHz Uplink) |
| 1 | CW(430MHz Beacon) |
| 0 | DJ-C5(430MHz FM) |
Satellite Status describes status of Cute-1.7 + APD II such as settings or flags.
| 7 | Satellite Mode 1:Debug, 0:Flight |
| 6 | USB Enable Flag 1:Enabled, 0:Disabled |
| 5 | RX Mutual Monitor 1:Enabled, 0:Disabled |
| 4 | TX Mutual Monitor 1:Enabled, 0:Disabled |
| 3 | Antenna Deployment Flag 1:Deployed, 0:Undeployed |
| 2 | DTMF Permission 1:Enabled, 0:Disabled |
| 1&0 | Digipeater Mode 2:Mailbox On 1:Digi On 0:Digi Off |
Counter of resets on the TX and RX communication controller.
3.3V, 5V, Battery Voltage
Main Bus Voltage
Where: 
Address of FRAM which APD data is stored.
Copyright ©, Tokyo Institute of Technology, All Rights Reserved.
